Meizu Lipro cabinet induction lamp “amateurs catch up with amateurs”?

After a lot of Meizu Lipro lamps, today it’s my turn to evaluate the cabinet lamp, a multi-functional sensor lamp waiting for you to discover more usage scenarios.

Since it is a practical multi-functional induction lamp, it is necessary to:

Have outstanding illuminant quality, ability is handled easily makeup look, read, even painting.

Reasonable brightness adjustment can meet the lighting requirements of more scenes.

Only with good interactive experience can convenience be improved.

Have enough appearance level to bear, just accord with my temperament.

Light quality

Official lipro lamps and lanterns are matched with the same purple LED, but it is necessary to test the shelves, so that we have the steelyard in the heart, the main test light source quality and illumination two aspects, which is closely related to the use of induction lamp.

Lipro Cabinet Lamp Wireless edition

Indicate CRI details

R1-r15 are all greater than 90, Ra97, R9=97, and skin R15=97. They are very friendly to face without makeup, with excellent color rendering index and good spectral continuity. They can meet the requirements of makeup and even painting.

Rg96-rf100, color saturation, color fidelity are at excellent level.

Color temperature and color tolerance

The brightness of the wireless charging version is relatively low, and the color tolerance is better than that of the ceiling lamp with the same light source, which is 3.7sdcm, the official color temperature is 4000K, and the measured temperature is 3847K, with slight deviation.

Scene: the brightness

The most widely used is kitchen ceiling cabinet, mirror cabinet, wardrobe, bookcase, bedside small night lamp, etc. The ceiling cabinet is mostly 70cm away from the operating table, mirror cabinet is mostly 50-60cm away from the face, and the bed edge is mostly 40+cm away from the ground. Therefore, the highest illuminance is measured with 70 and 60, and the highest and lowest illuminance is measured with 40cm. This Outlines more usage scenarios.

The wired version has 5W power. I got the wireless version, which has 2W power. The measured data are as follows:

The measurement will be slightly off

The distance of 70cm is obviously not enough for kitchen table lighting, please buy a wired version if you need it.

With a distance of 60cm, if used as a cosmetic lamp, a single lamp can only be used to fill the light. If there is no mirror cabinet lamp, two wireless charging version or wired version can be used.

Almirah illume does not have pressure basically, what close distance satisfies recreational reading, computer mesa fills light illume also is enough use.

As the small night lamp of bedside, welcome lamps and lanterns of door porch ark is more appropriate.

Summary of illumination:

The wireless charging version is more suitable for low-brightness scenes, so if you want highlighted functional lighting, consider the wired version.

More scenarios for you to develop…

Interaction experience

Lipro multi-function induction lamp light, human body induction, gesture induction three modules, manual, automatic two modes can be switched.

How much confidence do you have in the light guide plate to put the light in this position?

Switch to ON, the brightest mode is turned ON by default, and the hand scan switch is supported. This scene requires more high-brightness lighting, which effectively simplifies the operation.

Switch to AUTO to turn on light control + human body sensing + gesture mode. Human body sensing can only be turned on when it meets low ambient brightness + human activities. The lamp will be turned off 30S after people leave the sensing area, which can provide convenience and prevent misturn on at the same time.

Gesture mode can control the brightness of the induction lamp at any time, turn off the lamp automatically if there is no action after 30min, my mother no longer need to urge me to turn off the lamp.

Without shelter, the linear induction distance is about 5m, and the lateral induction distance is about 3m.

Hover in Auto mode to make stepless dimming, as shown in the picture:

Darken as shown:

The smoothness of the dimming experience is very good, there is no violent situation, which is a big compliment.

Appearance level and craft

As a mobile sensor lamp, it can be held in the hand from time to time to play, so the level of appearance, feel, materials, workmanship is also a must to consider the problem.

When I got this sensor lamp, I probably figured out that I would use the side light, because the whole lamp is only 1cm thick.

After disassembly, accessories overview:

Use 36 illuminant to do 2W power only, have a bit extravagant, this is some do not plan cost really.

36 led strip light blue cooperate with the light guide plate of optical processing, so that the light source is evenly distributed, and then through the sand surface lampshade secondary diffusion, which is just for more uniform light.

This configuration is designed to achieve this result.

The light source has uniform divergence and wide irradiation surface. The size of the diagram below is 120*70cm, and the whole receiving surface is relatively uniform, thanks to the good diffuseness of the light guide plate and the lampshade, as well as the light outlet Angle of 110°.

The rimless lampshade design did not play the role of uniform full light line, but there is a role of light and shade transition on the frame, which helps to soften the light to a certain extent, and has a great improvement on the appearance level of the whole lamp. The mobile phone should be full screen, and the lamp should be full cover.

The processing of aluminum surface is delicate, feel is also good, to create lamps and lanterns higher than the standard of lamps and lanterns, the joint processing is better, the appearance of the whole lamp can not see a screw, this may be the cleanliness of mobile phones.

I don’t know what 6 series aluminum is, but it’s amazing to open the sensor light. The aluminum surface inside the lamp body has obviously been processed for many times. Although it’s not exactly what it looks like inside and out, you can still see that it’s very careful.

All aluminum lamp body how magnet adsorption installation? Look at the three magnets in the figure above, the process of installing the back strip does not want to say more, see yourself.

The battery

With 2000mah detachable battery module, Type-c interface. The official minimum brightness state, with a lamp frequency of 10min per day, can last 4 months, there is no actual data for this, can only be updated later.

The appearance of the battery and the lamp body to maintain a highly consistent standard, joint processing is in place.

Zong:

Lipro multi-functional induction cabinet lamp has excellent light source quality, almost can meet the requirements of the light source of paintings, simple and practical interaction of human light is not cumbersome, thin design and excellent process processing, in the same kind of lamps and lanterns few competing products.

As for the price of one or two hundred yuan is really reasonable, like other lipro products, it belongs to the people who have the pursuit of life, which is in line with your temperament.

For more products please click: led bar light